VM4+4,
FOUR INPUT, ANALOG SUMMING KEY SWITCHER
Multiple Keys
on a Single Input Keyer
The VM4+4 consists of a two
board set plus a remote panel. The boards are designed to plug directly into two
slots in a Leitch Video or Grass Valley Group DA frame. This matrix allows a
single input keyer to perform up to 4 simultaneous keys, switched on or off, in
any order. Two level switching handles both KEY and FILL signals.
The remote switching panel,
operating on a single coax, may be located up to 200 feet from the matrix. An
optional GPI interface is available.
The VM4+4 may also be
housed in the FR710, one rack unit frame and power supply.
VM4+4 Price (two plug-in boards):
$1165.00 USD $875.00 USD / FR710
Price: $595.00 USD $445.00
USD
THE VBI-10
VERTICAL BLANKING INTERVAL BRIDGE
Maintain Complete Control of your VBI
Information
Routes VBI data, test signals, VITC, closed
captioning, around equipment which degrades, scrambles or deletes VBI information
Deletes any VBI line and/or inserts new
information
Transfers selected VBI data from one video feed to
another
Adjustable data level and setup
Any line (12 through 21) or combination of lines,
odd, even, or both fields, is user selectable
Optional GPI to automatically delete, bridge, or insert preselected line
on command
Failsafe relay bypass
Single board plugs directly into a LEITCH video DA
frame or BVS FR3 frame
Up to three boards may be housed in a BVS 1RU
frame
NTSC and PAL versions available
VBI-10 Price (plug-in board): $1595.00 USD
$1195.00 USD
/ FR710
Price: $595.00 USD $445.00
USD / FR3 Price: $420.00 USD
$315.00 USD
CP600 NTSC PROCESSING AMPLIFIER
Designed to plug directly into a Grass Valley DA frame, the CP600 provides exceptionally clean
processing of otherwise unairable signals. It may also be used to process
alpha key signals to enable enhanced keying performance from older type keyers.
Regenerates sync, blanking and burst. Provides control of video level,
chroma level, setup, burst level, burst phase, H. phase, sync width, blanking
width, equalization, black & white clip. The CP600 also provides
differential input and back porch clamping. For stand-alone operation,
this card may be housed in the BVS FR3 desktop frame.
(Note: version for Leitch DA frame is no longer available).
Features:
Locks to TBC'd input video
Accommodates ± 6dB variance on any input parameter
Regenerated sync, blanking and burst
Adjustable setup, video and chroma levels
Adjustable SCH, S/C and H. phase
Hard white and black clip
Equalization
Differential input plus two stage clamping
2 program and 2 color black outputs
Sync and burst maintained on loss of input
Chroma, burst on-off
Processing bypass
CP600 Price: $990.00 USD
$740.00 USD / FR3 Price:
$420.00 USD
$315.00 USD
VCA850 VIDEO CLAMPING DISTRIBUTION AMPLIFIER
Plugs directly into GVG 8500/8800 frames|
Eight fully isolated outputs
Back porch clamped
Clamping may be jumpered out for pulse and non-comp signals
Flat response to 20 MHz
VCA850
Price: $160.00 USD
$120.00 USD
EN300 NTSC ENCODER
Economical, compact, rugged, reliable and accurate
The perfect RGB to NTSC encoder for computers, weather maps and paint
boxes
Generates internal subcarrier in non-synchronous applications
(horizontal sync frequency must be approx. 15.750 KHz)
Locks to external sync and subcarrier when RGB source can be genlocked
Internal blanking regenerated in both modes
Optional sync-on-green input
Available in NTSC or PAL standard
EN300
Price: $1050.00 USD
$785.00 USD
EN350 MULTIFORMAT ENCODER
RGB to Betacam, MII, S-VHS YC, NTSC
The versatile and economical encoding system for computer graphics,
weather maps and paint boxes
Simultaneous outputs of component, YC and NTSC
Genlocks to external video or color black
No separate pulses or subcarrier required
Internal horizontal phasing, advance and delay
Internal multiformat color bar generator
Also available in PAL and PAL M standards
EN350
Price: $1850.00 USD
$1385.00 USD
D100 NTSC COMB FILTER DECODER
The D100 represents a significant cost/performance breakthrough in the art
of NTSC decoding using the adaptive comb filter technique.
Digital separation of luminance and chroma delivers full bandwidth decoded
outputs free of NTSC artifacts.
All decoding parameters, including filter weighting algorithms and
luminance equalization are digitally controlled from the front panel or from an optional
remote panel. A front panel bar graph indicates deviation from unity of each parameter.
Three complete control panel settings may be stored in the on-board, non-volatile memory
and recalled on command.
Input switching on the D100 allows either NTSC or S-VHS YC signals to be
selected. Simultaneous outputs of YC, Y/R-Y/B-Y and RGBS are provided on the rear panel.
Internal pinning allows sync to be added to any or all of the RGB outputs.
Impeccable performance, combined with a unique control system and
multiformat outputs, make the D100 the ideal choice where precision decoding of composite
NTSC is essential.
D100 Price: $4950.00 USD
$3700.00 USD
D101 NTSC NOTCH FILTER DECODER
The D101 is the ideal decoder for non-broadcast applications where cost is
a prime consideration. This decoder has the same unique control system and multiple
outputs as our high performance D100, but uses a notch filter for luminance/chroma
separation.
Features:
NTSC and YC inputs
Simultaneous outputs
of Y/R-Y/B-Y and RGBS
Sync may be added to any of the RGB outputs
Front panel digital control of hue, saturation, EQ and Y delay
On board store and recall of three complete control panel settings
Optional remote control panel
D101 Price: $2400.00 USD
$1800.00 USD
"THE
BANG BOX" - THE PERFECT SOLUTION FOR LOW COST SWITCHING
BB 500-2V - Two 5 X 1
Video Only Switchers
in 1RU Frame
BB1200V - 12
X 1 Video Only Switcher in 1RU Frame
BB500-2V:
Passive, analog switcher, Video only (audio no
longer available)
Video inputs: two
sets of five, 1Vp-p, 75 ohm 1% terminating BNC
Video outputs: two
(one from each set of inputs) 1Vp-p into 75 ohm BNC
Switching: random, passive. Low
noise, long life Schadow pushbuttons
BB1200V: passive, analog 12 X 1 switcher, video
only (audio no longer available)
Video inputs: twelve, 1Vp-p, 75
ohm 1% terminating BNC
Video output: one, 1Vp-p into
75 ohm BNC
Switching: random, passive.
Low noise, long life Schadow pushbuttons
BB500-2V
Price: $470.00 USD
$350.00 USD
BB1200V Price: $470.00 USD
$350.00 USD
